Synthesis of TiO2/nZVI nanocomposite for nitrate removal from aqueous solution

International Journal of Industrial Chemistry

دوره 10، شماره 3، آذر 2019، صفحه 225-236

نوع مقاله: research article

شناسه دیجیتال (DOI): https://doi.org/10.1007/s40090-019-0186-3

نویسندگان

Zahra Hejri^* ؛ Mehri Hejri؛ Maryam Omidvar؛ Sadjad Morshedi

Department of Chemical Engineering, Quchan Branch, Islamic Azad University, Quchan, 94791-76135, Iran

چکیده

To develop a new adsorbent for removal of nitrate and to enhance the adsorbent separation from aqueous solution, surface modification of titanium dioxide nanoparticles with nano-zero-valent iron (nZVI) was performed through chemical coprecipitation of magnetic nanoparticles on TiO₂ surface. Morphological, structural and magnetic properties of modified adsorbents (TiO₂/nZVI) were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared radiation (FTIR) and vibrating sample magnetometer (VSM). To determine the ionic strength effect and optimal removal conditions, the effect of contact time (60–210 min), pH (4–10) and adsorbent dosage (0.5–1.5 g/L) on adsorption efficiency were studied, using response surface method. Obtained results showed that the nitrate removal efficiency decreased with increasing ionic strength. The TiO₂/nZVI nanocomposites exhibited a ferromagnetic behavior and its saturation magnetization was 795.28 memu/g. The maximum nitrate removal (98.226%) achieved by modified TiO₂ was about 14.65% higher than the unmodified nanoparticles. The optimized adsorption parameters were: adsorbent dosage 0.982 g/L, pH 4.185 and the contact time 150.091 min.

کلیدواژه‌ها

Titanium dioxide · nZVI · Nitrate · Aqueous solution · Adsorption