اخبار و اعلانات

 آمار

تعداد نشریات418
تعداد شماره‌ها9,997
تعداد مقالات83,556
تعداد مشاهده مقاله77,607,211
تعداد دریافت فایل اصل مقاله54,666,153
Ettefaghi, Ehsan-o-llah, Ahmadi, Hojjat, Rashidi, Alimorad, Mohtasebi, Seyed Saeid, Alaei, Mahshad. (1392). Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive. نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 4(1), 215-220. doi: https://doi.org/10.1186/2228-5547-4-28
Ehsan-o-llah Ettefaghi; Hojjat Ahmadi; Alimorad Rashidi; Seyed Saeid Mohtasebi; Mahshad Alaei. "Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive". نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 4, 1, 1392, 215-220. doi: https://doi.org/10.1186/2228-5547-4-28
Ettefaghi, Ehsan-o-llah, Ahmadi, Hojjat, Rashidi, Alimorad, Mohtasebi, Seyed Saeid, Alaei, Mahshad. (1392). 'Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive', نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 4(1), pp. 215-220. doi: https://doi.org/10.1186/2228-5547-4-28
Ettefaghi, Ehsan-o-llah, Ahmadi, Hojjat, Rashidi, Alimorad, Mohtasebi, Seyed Saeid, Alaei, Mahshad. Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive. نشریه علمی پژوهشی دانشگاه آزاد اسلامی, 1392; 4(1): 215-220. doi: https://doi.org/10.1186/2228-5547-4-28

Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive

International Journal of Industrial Chemistry
دوره 4، شماره 1، اسفند 2013، صفحه 215-220
نوع مقاله: research article
شناسه دیجیتال (DOI): https://doi.org/10.1186/2228-5547-4-28
نویسندگان
Ehsan-o-llah Ettefaghi1؛ Hojjat Ahmadi* 1؛ Alimorad Rashidi2؛ Seyed Saeid Mohtasebi1؛ Mahshad Alaei2
1Department of Mechanical Engineering of Agricultural Machinery, University of Tehran, Mesbah Cross, Karaj, 4111, Iran
2Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, Tehran, 14665-1998, Iran
چکیده
Background
The properties of lubricants are mainly the result of adding a material for improving or producing the required properties. Today, different materials with various nanostructures are used as new additives which, because of their unique properties, are used for improving the lubricant's properties. The purpose of the present research is to add copper oxide (CuO) nanoparticles to engine oil and evaluate the produced changes in some of its properties. Also, viscosity, pour point, and flash point of nanolubricants, which are made at different concentrations (0.1, 0.2, and 0.5 wt.%), and also their thermal conductivity coefficient as four quality parameters which are effective in the functionality of engine oil are evaluated.
Results
Upon the obtained results, thermal conductivity coefficient and flash point of nanolubricants with 0.1 wt.% concentration, respectively, had 3% and 7.9% improvement with respect to the base oil. Also, the oil's viscosity, as a very important factor in lubricating issue, at a lower concentration with respect to the engine oil without CuO had no appreciable change.
Conclusion
Among the different methods which have been used for dispersing nanoparticles inside the base oil, using planetary ball mill was determined as the most important method for stabilization of nanoparticles inside SAE 20W50 engine oil. Also, the physical properties of nanolubricants were measured based on the American Society for Testing and Materials standard methods.
کلیدواژه‌ها
Copper oxide nanoparticles؛ Engine oil؛ Viscosity؛ Thermal conductivity coefficient
آمار
تعداد مشاهده مقاله: 25


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب