Bandpass Biomedical Color Filter Based on 1-D Photonic Crystal Structure

International Journal of Biophotonics and Biomedical Engineering

مقاله 1، دوره 1، شماره 1، مهر 2021، صفحه 3-10   

نوع مقاله: Research article

شناسه دیجیتال (DOI): 10.30495/ijbbo.2021.689701

نویسندگان

Hamed Alipour-Banaei^{* 1}؛ Navvab Khorrammaslack²

¹Department of Electronics, Tabriz Branch, Islamic Azad University, Tabriz, Iran.

²Department of Electrical Engineering, Ahar Branch, Islamic Azad University, Ahar, Iran

چکیده

We propose a flexible design for tunable bandpass biomedical color filter based on one-dimensional photonic crystals with introducing defect layers into one dimensional periodic structure which permits localized modes to exist with frequency inside photonic band gap (PBG). In the proposed structure we can tune localized modes for manifesting different colors by selecting a specific wavelength in the visible light spectrum and also we tuned localized modes in PBG for RGB wavelengths applicable in biomedical systems. With changing the defect layer refractive index, the tuning of the frequency has been done and therefore this structure is suitable for optical biomedical bandpass filter.

کلیدواژه‌ها

Photonic Crystal؛ Color Filter؛ Photonic Band Gap؛ RGB Colors؛ Biomedical Systems

مراجع

[1]    Ch.-K. Liu, K.-T. Cheng, and Y.-G. Fuh, “Designs of High Color Purity RGB Color Filter for Liquid Crystal Displays Applications Using Fabry-Perot Etalons,” IEEE Journal of Display Technology, vol.8, pp. 174 – 178, 2012.
[2]    E. Lavi-Burlak and M. Porat, “Color Image Compression Using Mual Spectral Information,” IEEE 24th Convention of Electrical and Electronics in Israel, 2006.
[3]    Sh. Koyama, Y. Inaba, M. Kasano, and T. Murata, “A Day and Night Vision Mos Imager with Robust PhotonicCrystalBased RGB andIR,” IEEE Transactions on Electron, vol. 55, pp. 754 – 759, march 2008.
[4]    K. Samu and A. Szakaly-Molnar, “Spectral Simulation of the Color –Stimuli of the LCD Displays without Spectrophotometric Measuring,” IEEE International Symposium on Computational Intelligence and Information, vol.85, pp. 11702364 (1-4), November 2010, 
[5]    H.-X. Qing, L.-Y. Jiang, X.-Y. Li, and W. Jiao, “Different Kinds of band-pass filters based on one- dimensional photonic crystal heterostructures,” Optik, vol. 122, pp.1836-1839, October 2011.
[6]    A. Bananej , S.M. Hamidi , W. Li , C. Li, and M.M.Tehranchi, “A Flexible design for one-dimensional photonic crystals with controllable photonic bandgap width,” Optical Material, vol. 30, pp.1822-1827, 2008. 
[7]    E.-H. Cho, H.-S. Kim, and B.-H. Cheong, “Prudnikov Oleg, Wenxu Xianyua, Jin-Seung Sohn, Dong-Joon Ma, Hwan-Young Chio, No-Cheol Park and Young-Pil Park,Two-Dimensional Photonic Crystal Color Filter Development,” Optics Express, vol.17, pp. 8621(1-9), May 2009.
[8]    N. Young Ha, Y. Takanishi, K. Ishikawa, and H. Takezoe, “Simultaneous RGB reflection from single-pitched cholesteric liquid crystal films with Fibonaccian defect,” Optics Express, Vol.15, No.3, pp. 1024-1029, February 2007.
[9]    A.- B. Mehdizadeh, “A Proposal for Anti-UVB Filter Based on One-Dimensional Photonic Crystal Structure,” Digest Journal of Nanomaterials and Biostructures, Vol.7. No.1, pp.367-371, 2012.
[10]    J.D. Joannopoulos, R.D. Meade, and J.N. Winn, Photonic Crystal: Molding the Flow of Light, Princeton.University Press, Princeton, NJ, USA, 1995.
[11]    K. Sakoda, Optical Properties of Photonic Crystal, Springer-Verlag, Berlin, 2001.
[12]    Y.Cho, Y.K .Choi, and S.H. Sohn, “Optical Properties of Neodymium – Containing Polymethylmethacrylate Films for the Organic Light Emitting Diode Color Filter,” Appl. Phys.lett. vol. 89, pp. 051102 (1-3), 2006. 
[13]    P.B. Catrysse, W. Suh, S. Fan, and M. Peeters, “One-Mode Model for Patterned Metal Layers Inside Integrated Color Pixel,” Opt.Lett. vol. 29, pp. 974-976, 2004.
[14]    P. Yen, Optical Waves in Layered Media Wiley, New York Chap, 1998.