Two efficient approaches for improving field emission properties of ZnO NRs

Majlesi Journal of Telecommunication Devices

مقاله 2، دوره 6، شماره 1، خرداد 2017   

نوع مقاله: Articles

نویسندگان

Marziyeh Advand^{* 1}؛ Bahram Azizollah Ganji¹؛ Mohammad Reza Kolahdouz²

¹Babol Noshirvani University of Technology

²University of Tehran

چکیده

The structure of pure and Al doped ZnO (AZO) nanorods (NRs) has been studied. A post annealing procedure in oxygen ambience at 400ﹾC were used in order to improve crystallinity of both group of samples. The XRD patterns illustrate that the Al doped ZnO NRs were successfully synthesized using our method. Then, the field emission properties of the as grown NRs before and after annealing process were evaluated by our home-made setup. Experimental results show that Al density in ZnO NRs directly affects FE properties of these samples. The oxygen post annealing process leads to a significant improvement in the field emission performances of pristine and doped ZnO NRs including considerably lower turn on voltage, and higher emission current. 

کلیدواژه‌ها

Zinc Oxide؛ Al-doped Zinc Oxide؛ Nanorods؛ Field Emission؛ Oxygen Annealing؛ Oxygen Vacancy

مراجع

[1] N. Doostani, S. Darbari, S. Mohajerzadeh, and M. K. Moravvej-Farshi, “Fabrication of highly sensitive field emission based pressure sensor, using CNTs grown on micro-machined substrate,” Sensors Actuators A Phys., vol. 201, pp. 310–315, Oct. 2013.

[2] W. B. Choi et al., “Fully sealed, high-brightness carbon-nanotube field-emission display,” Appl. Phys. Lett., vol. 75, no. 20, pp. 3129–3131, Nov. 1999.

[3] Y. Abdi, J. Koohshorkhi, S. Mohajerzadeh, S. Darbari, and Z. Sanaee, “Embedded vertically grown carbon nanotubes for field emission applications,” J. Vac. Sci. Technol. B Microelectron. Nanom. Struct., vol. 25, no. 3, p. 822, 2007.

[4] K. B. K. Teo et al., “Microwave devices: Carbon nanotubes as cold cathodes,” Nature, vol. 437, no. 7061, pp. 968–968, Oct. 2005.

[5] J. Ruan et al., “ESD failure signature in capacitive RF MEMS switches,” Microelectron. Reliab., vol. 48, no. 8–9, pp. 1237–1240, Aug. 2008.

[6] L. Michalas et al., “A study of field emission process in electrostatically actuated MEMS switches,” Microelectron. Reliab., vol. 52, no. 9–10, pp. 2267–2271, Sep. 2012.

[7] K. P. Ghatak, S. Bhattacharya, A. Mondal, S. Debbarma, P. Ghorai, and A. Bhattacharjee, “On the Fowler-Nordheim Field Emission from Quantum-Confined Optoelectronic Materials in the Presence of Light Waves,” Quantum Matter, vol. 2, no. 1, pp. 25–41, Feb. 2013.

[8] L. Li, K. Yu, Y. Wang, and Z. Zhu, “Photoluminescence and field emission properties of Sn-doped ZnO microrods,” Appl. Surf. Sci., vol. 256, no. 11, pp. 3361–3364, Mar. 2010.

[9] D. Sarkar, C. K. Ghosh, and K. K. Chattopadhyay, “Morphology control of rutile TiO2 hierarchical architectures and their excellent field emission properties,” CrystEngComm, vol. 14, no. 8, p. 2683, 2012.

[10] L. Liao, J. C. Li, D. F. Wang, C. Liu, and Q. Fu, “Electron field emission studies on ZnO nanowires,” Mater. Lett., vol. 59, no. 19–20, pp. 2465–2467, Aug. 2005.

[11] Xiaomeng Song et al., “Comparative study of field emission from individual ZnO nanowire with and without NH3 plasma treatment,” in 2015 28th International Vacuum Nanoelectronics Conference (IVNC), 2015, pp. 150–151.

[12] J.-L. Wang, T.-Y. Hsieh, P.-Y. Yang, C.-C. Hwang, D.-C. Shye, and I.-C. Lee, “Oxygen annealing effect on field-emission characteristics of hydrothermally synthesized Al-doped ZnO nanowires,” Surf. Coatings Technol., vol. 231, pp. 423–427, Sep. 2013.

[13] R. Zou, G. He, K. Xu, Q. Liu, Z. Zhang, and J. Hu, “ZnO nanorods on reduced graphene sheets with excellent field emission, gas sensor and photocatalytic properties,” J. Mater. Chem. A, vol. 1, no. 29, p. 8445, 2013.

[14] F. Dehghan Nayeri, K. Narimani, M. Kolahdouz, E. Asl-Soleimani, and F. Salehi, “Surface structure optimization for cost effective field emission of zinc oxide nanorods on glass substrate,” Thin Solid Films, vol. 571, pp. 154–160, Nov. 2014.

[15] S. Chen, J. Chen, J. Liu, J. Qi, and Y. Wang, “The effect of high-temperature oxygen annealing on field emission from ZnO nanowire arrays,” Appl. Surf. Sci., vol. 357, pp. 413–416, Dec. 2015.

[16] J. Song et al., “Epitaxial ZnO Nanowire-on-Nanoplate Structures as Efficient and Transferable Field Emitters,” Adv. Mater., vol. 25, no. 40, pp. 5750–5755, Oct. 2013.

[17] R. H. Fowler and L. Nordheim, “Electron Emission in Intense Electric Fields,” Proc. R. Soc. A Math. Phys. Eng. Sci., vol. 119, no. 781, pp. 173–181, May 1928.

[18] J. W. Gadzuk and E. W. Plummer, “Field Emission Energy Distribution (FEED),” Rev. Mod. Phys., vol. 45, no. 3, pp. 487–548, Jul. 1973.

[19] C. Li et al., “Enhanced field emission from injector-like ZnO nanostructures with minimized screening effect,” Nanotechnology, vol. 18, no. 13, p. 135604, Apr. 2007.

[20] K.-S. Park et al., “Enhancement of Field-Emission Properties in ZnO Nanowire Array by Post-Annealing in H2 Ambient,” J. Nanosci. Nanotechnol., vol. 9, no. 7, pp. 4328–4332, Jul. 2009.