The Study of Magnetic Flux Shunts Effects on the Leakage Reactance of Transformers via FEM

Majlesi Journal of Electrical Engineering

مقاله 4، دوره 4، شماره 3، آذر 2010، صفحه 47-52   

نوع مقاله: Review Article

شناسه دیجیتال (DOI): 10.1234/mjee.v4i3.241

نویسندگان

Saadat Arand^* ؛ Karim Abbaszadeh

Islamic Azad University, Dehdasht Branch

چکیده

The influence of arrangement, dimensions, and magnetic permeability of the magnetic flux shunts on the flux distribution and leakage reactance of the power transformers is studied in this paper by using a finite elements method and a simple modeling approach. By using magneto-static analysis and finite element method, first the flux distribution in the 2D model of a core-type three phase power transformer and then using the magnetic stored energy method the leakage reactance of the transformer windings is calculated. By studying the different models including magnetic flux shunts, the effect of the arrangement, geometric dimensions as well as the magnetic permeability of the magnetic flux shunt on the leakage reactance of the transformer are studied and some interesting results are obtained. It is shown that the variation of these parameters in the transformer model has significant effects on the leakage reactance of the transformer.

کلیدواژه‌ها

FEM؛ Islamic azad university of dehdasht؛ en؛ Leakage Reactance؛ Magnetic Shunt؛ Modeling؛ power transformer

مراجع

[1] Jamali S., Ardebili M., Abbaszadeh K.; “Calculation of Short Circuit Reactance and Electromagnetic Forces upon the Three Phase Transformer Coils Using FEM”, ICEMS 2005, Proceedings of the 8th International Conference on Electrical Machines and Systems, Vol. 3, pp. 1725-1730, (27-29 September 2005)

[2] Wang J., Witulski A.F., Vollin J.L., Phelps T.K., Gardwell G.I.; “Derivation, Calculation and Measurement of Parameters for a Multi–Winding Transformer Electrical Model”, Applied Power Electronics Conference and Exposition, 1999. APEC '99. Fourteenth Annual, Vol. 1, pp. 220-226, (14-18 March 1999)

[3] Hayek J.E.; “Short-Circuit Reactance of Multi-Secondaries Concentric Winding Transformers, Electric Machines and Drives Conference. IEMDC 2001”, IEEE International Electric Machines and. Drives Conference, pp. 462-465, (2001)

[4] Magot D., Margueron X., Keradec J.P.; “PEEC-Like Analytical Calculation of Static Leakage Inductances of H.F Transformers”, Industry Applications Conference, 2004. 39th IAS Annual Meeting. Conference Record of the 2004 IEEE, Vol. 1, (3-7 October 2004)

[5] Longfu L., Ziya W., Tiaosheng T.; “The Method Solving Short-Circuit Impedance between Two Interleave Windings in the Multi-Winding Core-Type Transformer with Finite Element Method, Electrical Machines and Systems”, ICEMS 2001. Proceedings of the Fifth International Conference, Vol. 1, pp. 254-256, (18-20 Aug. 2001)

[6] Smajic J., Madzarevic V., Berberevic S.; “Numerical Calculation of Power Transformers Equivalent Circuit Parameters, Electric Power Engineering”, PowerTech Budapest 99. International Conference, pp. 96, (29 August-2 September 1999)

[7] Alonso G., Antonio J.; “A New Method for Calculating of Leakage Reactance and Iron Losses in Transformers”, Electrical Machines and Systems, ICEMS 2001, Proceedings of the Fifth International Conference, Vol. 1, pp. 178 – 181, (18-20 Aug. 2001)

[8] Salon S., Lamattina B., Sivasbramaniam K.; “Comparison of Assumptions of Short Circuit Forces in Transformers”, IEEE Transaction on magnetics, Vol. 36, No.5, pp.3521-3523, (September 2000)

[9] Zhou P., Fu W.N., Lin D., Stanton S., Cendes Z.J., Xu L.; “Numerical Modeling of Electrical Machines and Its Application”, Industry Applications Conference, 2002. 37th IAS Annual Meeting, Vol. 3, pp. 1936-1942, (13-18 October 2002)

[10] Lakhiani V.K., Transformers McGraw-Hill Publishing Company, (1987)

[11] Martin J. Heathcote, J&P Transformer, Reed Educational and Professional publishing Ltd, (1998)