Design, Implementation and Optimal Control of a Series Robot Based on Fuzzy Logic Method

Majlesi Journal of Electrical Engineering

مقاله 2، دوره 10، شماره 2، شهریور 2016   

نوع مقاله: Review Article

نویسندگان

Seyed Ali Hashemi¹؛ Meisam Soltani^{* 2}؛ Hossein Emami¹

¹Department of Electrical Engineering, Majlesi Branch, Islamic Azad University, Isfahan, Iran

²Majlesi Branch, Islamic Azad University

چکیده

The series robot is a type of the mechanical arms with a function similar to human hands which is usually programmable. These robots, depending on the application, are designed in order to perform various operations such as clinch, welding, packaging, assembly and etc. One of the most important issues in the field of the series robots that has been highly regarded in the past few decades, is the path control. Various industries have urgent and serious need to know the optimal control of path. In this paper, the design and implementation of a series robot with two degrees of freedom and its fuzzy control is studied. This fuzzy controller, is an approach to optimal control of robot path. In these robots, finding the optimal path would be time consuming. This study uses fuzzy logic and the laws governing it, which will result the most efficient path in very little time. Then, how to use and implement Fuzzy toolbox in MATLAB software will be discussed. Evaluation of the results show that the proposed model has a higher rate than other existing models, in the field of the optimal control of robot path.

کلیدواژه‌ها

fuzzy logic؛ Majlesi Branch؛ en؛ Mechanical Arm؛ Islamic Azad University؛ Optimization؛ Series Robot

مراجع

[1] S. Marie, E. Courteille, P. Maurine, Elasto-geometrical modeling and calibration of robot manipulators: Application to machining and forming applications, Mechanism and Machine Theory, Vol. 69, pp. 13-43, 2013.

[2] H. R. Hassanzadeh, M. R. Akbarzadeh, A. R. Akbarzadeh, A. Rezaei, An interval-valued fuzzy controller for complex dynamical systems with application to a 3-PSP parallel robot, Fuzzy sets and systems, Vol. 235, pp. 83-100, 2014

[3] L. Vermeiren, A. Dequidt, M. Afroun, T. M. Guerra, Motion control of planar parallel robot using the fuzzy descriptor system approach, ISA transactions, Vol. 51, No. 5, pp. 596-608, 2012.

[4] S. I. Han, J. M. Lee, Recurrent fuzzy neural network backstepping control for the prescribed output tracking performance of nonlinear dynamic systems, ISA transactions, Vol. 53, No. 1, pp. 33-43, 2014.

[5] O. Castillo, R. M. Marroquin, P. Melin, F. Valdez, J. Soria, Comparative study of bio-inspired algorithms applied to the optimization of type-1 and type-2 fuzzy controllers for an autonomous mobile robot, Information Sciences, Vol. 192, pp. 19-38, 2012.

[6] M. Y. Hassan, G. Kothapalli, Interval Type-2 fuzzy position control of electro-hydraulic actuated robotic excavator, International Journal of Mining Science and Technology, Vol. 22, No. 3, pp. 437-445, 2012.

[7] R. J. Lian, Grey-prediction self-organizing fuzzy controller for robotic motion control, Information Sciences, Vol. 202, pp. 73-89, 2012.

[8] Y. I. Al. Mashhadany, ANFIS-Inverse-Controlled PUMA 560 Workspace Robot with Spherical Wrist, Procedia Engineering, Vol. 41, pp. 700-709, 2012.

[9] M. Nabizade, A. Mos’aedi, M. Hesam, M. Dehghani, M. Zakerinia, M. Meftah, River flow prediction using a fuzzy inference system (FIS) and Adaptive Neuro-fuzzy inference system (ANFIS), Journal of Science and Engineering of Iran Watershed Management, Vol. 5, No. 17, pp. 7-14, 2011. (In Persian)

[10] L. Zadeh, Quantitative fuzzy semantics, Information sciences, Vol. 3, No. 2, pp. 159-176, 1971.

[11] R. Kruse, C. Borgelt, F. Klawonn, C. Moewes, M. Steinbrecher, P. Held, Computational Intelligence: A Methodological Introduction. Springer, 2013.

[12] M. Zhou, S. Li, X. Yang, Global Stability of Two Linear Non-autonomous Takagi–Sugeno Fuzzy Systems, Ecosystem Assessment and Fuzzy Systems Management, Springer International Publishing, pp. 147-155, 2014.