Design and Development of a Novel Multi-Axis Automatic Controller for Improving Accuracy in CNC Applications

Majlesi Journal of Electrical Engineering

مقاله 4، دوره 11، شماره 1، خرداد 2017   

نوع مقاله: Review Article

نویسندگان

Shahrokh Hatefi؛ Omid Ghahraei^* ؛ Behzad Bahraminejad

Center for Advanced Engineering Research, Majlesi Branch, Islamic Azad University, Isfahan, Iran

چکیده

A ubiquitous device-widely used in many industrial applications is Computer Numerical Control (CNC) machinery. CNC controller constitutes the main part of a CNC machine, which performs the task of controlling and navigating the tool and implementation of industrial processes. Although there have been many controllers, designed and used, in CNC applications in recent years, most of them experience some limitations and disadvantages towing to the design techniques. This project aims to design and fabricate an innovative Multi Axis Automatic Controller (MAAC) to be used in CNC machinery, which has much superiority over the existing controllers and provides an ideal performance. The MAAC has a closed-loop control system, which can control and drive stepper motors, servo motors, DC motors, and hydraulic and pneumatic movement systems. An Improved accuracy and repeatability within rapid implementation of industrial process could be achieved by using of the MAAC in different CNC applications.

کلیدواژه‌ها

CNC Controller؛ Sepahan Gostar Mechatronics Co. for providing the manufacturing costs (about USD 4؛ en؛ CNC Machinery؛ 500)؛ Closed-Loop Linear Control؛ Stanford University؛ Ca؛ USA؛ Majlesi Branch؛ Islamic Azad University؛ Isfahan؛ Iran

مراجع

[1] Suh, Seong-kyoonkang, Dae-Hyuk Chung, Ian Stroud, Suk-Hwan. Theory and Design of CNC systems. Springer Series in Advanced Manufacturing. ISSN 1860-5168.

[2] Patrick Hood-Daniel, James Floyd Kelly. Build your own CNC machine. Apress. ISBN: 978-1-4302-2489-1.

[3] Peter Smid. CNC Programming Handbook. Industrial Press Inc. ISBN: 0-8311-3158-6.

[4] Computer Numerical Control. IC Learning Series. Copyright reserved by Industrial Centre, The Hong Kong Polytechnic University.

[5] Steve Krar, Arthur Gill. Computer Numerical Control Programming Basics. Industrial Press Edition. ISBN: 0-8311-3131-4.

[6] R. E. Breaz, O. C. Bologa, V. S. Oleksik, G. S. Racz. Computer Simulation for the Study of CNC Feed Drives Dynamic Behavior and Accuracy. EUROCON the International Conference on Computer as a Tool. 2009.

[7] K. Ekkachai, U. Komin, W. Chaopramualkul, A. Tantaworrasilp, P. Kwansud, P. Seekhao, T. Leelasawassuk, K. Tanta-Ngai, K. Tungpimolrut. Design and development of an open architecture CNC controller for milling machine retrofitting. ICROS-SICE International Joint Conference. 2009.

[8] J. Dong, X. Yang, Q. Liu, Z. Wang, T. Wang. Design and implementation of CNC controllers using reconfigurable hardware. IEEE International Conference on Control and Automation. 2009.

[9] P. A. S. da Rocha Junior, R. Diogne de Silva e Souza, M. E. de Lima Tostes. Prototype CNC machine design. 9th IEEE/IAS International Conference on Industry Applications. 2010.

[10] X. Lu, D. Yu, Y. Hu, X. Jia, Q. Feng, T. Sorin, B. Cristina, B. Octavian-Constantin. Design and Emplementation of High-performance Embedded Numerical Control System. IEEE 12th International Conference on Computer and Information Technology. 2012.

[11] P. Sofer, J. Skuta, J. Gebauer. Drilling of circuit boards using CNC controlled by programable logic controller. 13th IEEE International Carpathian Control Conference. 2012.

[12] Lie Tang, R. G. Landers. Predictive Contour Control with Adaptive Feed Rate. IEEE/ASME Transactions on Mechatronics. VOL. 17, NO. 4, 2012. ISSN: 1083-4435.

[13] R.-E. Breaz, G. Racz, O. C. Bologa, V. S. Oleksik. Motion control of medium size CNC machine-tools-A hands-on approach. 7th IEEE Conference on Industrial Electronics and Applications. 2012.

[14] Ch. Liu, HU Yongbiao，FuBaoqin. The State-of-the-art and Development Tendency of CNC Laser Cutting Machine At Home and Abroad-An Overview. Congress on Engineering and Technology (S-CET). 2012.