A Review of Various Topologies and Control Schemes of DSTATCOM Implemented on Distribution Systems

Majlesi Journal of Electrical Engineering

مقاله 5، دوره 11، شماره 1، خرداد 2017   

نوع مقاله: Review Article

نویسندگان

Pankaj Negi^{* 1}؛ Yash Pal²؛ G Leena³

¹IMS Engineering college

²Department of Electrical Engineering, NIT Kurukshetra Haryana, India

³Department of Electrical Engineering, Manavrachna International University Faridabad, India

چکیده

Nowadays the demand for receiving the high quality electrical energy is being increasing as consumer wants not only reliable but also quality power .The usage of automated equipment are increasing and far more susceptible to disturbances compare to the previous generation equipment and information systems. With
the deregulation of the electric power energy market, the awareness concerning the quality of power has been increasing day by day among different categories of customers. Power quality is an issue that is becoming increasingly important to electricity consumers at all levels of usage. Power quality can be improved in distributed system by using shunt compensation device known as Distribution
Static Compensator (DSTATCOM). This paper covers the different topologies of Distribution Static Compensators (DSTATCOMs) and the various control methodologies, and its selection for specific applications.
Nowadays the demand for receiving the high qualityelectrical energy is being increasing as consumer wants not onlyreliable but also quality power .The usage of automated equipmentare increasing and far more susceptible to disturbances compare tothe previous generation equipment and information systems. Withthe deregulation of the electric power energy market, the awarenessconcerning the quality of power has been increasing day by dayamong different categories of customers. Power quality is an issuethat is becoming increasingly important to electricity consumers atall levels of usage. Power quality can be improved in distributedsystem by using shunt compensation device known as DistributionStatic Compensator (DSTATCOM). This paper covers the differenttopologies of Distribution Static Compensators (DSTATCOMs) andthe various control methodologies, and its selection for specificapplications.

مراجع

1. M. I. M. Montero, E. R. Cadaval, and F. B. Gonzalez,“Comparison of control strategies for shunt active power filters in three-phase four-wire systems,” IEEE Trans. Power Electron., vol. 22, no. 1, Jan.2007. pp. 229–236
2. Iyer S, Ghosh A, Joshi A. Inverter topologies for {DSTATCOM} applications—asimulation study. Electric Power System Res 2005;75(23):pp.161–70.
3. Eldery M, El-Saadany E, Salama M. Dstatcom effect on the adjustable speeddrive stability boundaries. IEEE Trans Power Deliv 2007;22(2):pp.1202–9.
4. Zaveri T, Bhalja B, Zaveri N. “Comparison of control strategies for {DSTATCOM}in three-phase, four-wire distribution system for power quality improvement under various source voltage and load conditions”. Int J ElectrPower Energy Syst 2012;(1):pp.582–94.