Identification and Assessment of health, safety and environmental risk factors of Chemical Industry using Delphi and FMEA methods (a case study)

Anthropogenic Pollution

دوره 6، شماره 2، اسفند 2022، صفحه 39-47   

نوع مقاله: ORIGINAL RESEARCH PAPER

شناسه دیجیتال (DOI): 10.22034/ap.2022.1971680.1138

نویسندگان

Hassan Azizi¹؛ Mina Mackialeagha^{* 2}؛ Bita Azadbakht²؛ hassan samadyar²

¹PhD student of Environmental Management,Department of Environmental Science,Roudehen Branch,Islamic Azad University,roudehen ,Iran.

²Assistant Professor,Department of Environmental Science,Roudehen Branch,Islamic Azad University,roudehen Iran.

چکیده

Today, accidents, explosions, environmental damages and any defects in chemical industry are inevitable events. The ever-increasing of such industries makes effective risk management of these projects necessary to prevent environmental and health pollution and damage. The present study aimed to identify the possible risks caused by chemical industries in the south of Tehran (Iran) by examining the documents available in the health, safety and environment (HSE) units, interviewing experts, and using the Delphi technique and questionnaire. FMEA method was used to prioritize potential risks based on the risk priority number. Data analysis identified 17 risks in four environmental (n=6), health (n=5), safety (n=3) and occupational (n=3) categories. Based on the results of both Delphi and FMEA methods, the highest level of risk was related to three environmental aspects of "air pollution and air quality change", "surface water and groundwater pollution" and "soil pollution". According to the results of the FMEA method, in addition to the three environmental risks mentioned, the occupational risks including "failure to use personal protective equipment by personnel and lack of warning signs for personnel" and "human and operational errors, inappropriate equipment, and failure to comply with workplace safety instructions" were also detected as high-level risks. The findings of the current study revealed that despite the applicability of the FMEA technique in determining the risk factors caused by the activity of the chemical industry, preliminary hazard analysis is also suggested for a more accurate and complete assessment of this process.

کلیدواژه‌ها

risk management؛ environmental risk؛ Delphi؛ FMEA؛ chemical industry؛ Tehran

مراجع

Babaei A, Mohammadzadeh A, (2013) Investigating risk assessment and management techniques and selecting a suitable technique in the Water and Sewage Company of East Azarbaijan Province. The 6th Trans-Regional Conference On Advances in Engineering Sciences, Ayandegan Institute of Higher Education, Tonekabon, Iran. https://www.civilica.com/Paper-AIHE06-AIHE06_284.htm

Bahmanpour H, (2020) Environmental Risk of Carbon Monoxide Pollutant in Tehran Outdoor Sports Spaces and Recreation Sites, Geographical Researches, 35 (2), 155-165 pp. 

Cheraghi M, Karbassi A, Monavari S, Baghvand A, (2018) Environmental risk management associated with the development one of oil fields in southwestern Iran using AHP and FMEA methods. Anthropogenic Pollution, 2(2): 41-54. doi: 10.22034/ap.2018.573557.1025

Eskandari D, Borgheipour H, Jabbari M, Abdpur A, Monazami Tehrani G, (2020) Development of a technique for semi-quantitative risk assessment of exposure to chemicals. Iran Occupational Health, 17(1): 881-892.

Fataei E, (2020) The Assessment of Environmental and Health Risks in Sabalan Dam Basin Using WRASTIC Model. Journal of Health, 11(4):555-573. (In Persian)

Habibinia H, Dashti S, (2018) Environment, Health and Safety Risk Assessment in Industrial Sector of Salman Farsi Agro-Industrial Company Using Delphi Technique and FMEA & TOPSIS Integrated Model. Environmental Science and Technology, 20(1): 141-156.

Hassanpour Kourandeh H, Fataei E, (2013) Risk assessment of pollution accidents in dam reservoirs, Using WRASTIC Model (Case study: Shafarood Dam, Guilan, Iran). Journal of Environmental Geology, 7(25):19-36. Doi: 10.22093/wwj.2021.260344.3089. (In Persian)

Hoseini  LK, Yengejeh  RJ, Rouzbehani  MM,  Sabzalipour  S, (2022) Health risk assessment of volatile organic compounds (VOCs) in a refinery in the southwest of Iran using SQRA method. Frontiers in Public Health, 10:978354.

Hsu CH, Sandford BA, (2007) The Delphi Technique: Making Sense of Consensus. Practical Assessment, Research & Evaluation, 12(10): 1-8.

Jabraeil Nejad P, Fataei E, (2015) Assessing the Environmental risk in using Wastewater of municipal sewage treatment plant in agricultural irrigation.  Biological Forum, 112-121.

Josie A, Saffarian Sh, (2011) Environmental hazards analysis of Abadan gas power plant using TOPSIS method. Journal of Environmental Studies; 37(58): 53-66. (In Persian)

Jozi SA, Farbod Sh, Arjmandi R, Nouri J, (2013) Environmental Risk Assessment on South Pars Phases 15 and 16 Utility by Using EFMEA Method.  Environmental Researchs, 4(7): 59-72.

Jozi SA, Gilji N, Mohammad Pham I, (2011) Environmental risk assessment and management of the Olefin Plant in Arya Sasol Petrochemical Complex using EFMEA method. Journal of Sciences and Techniques in Natural Resources, 6(4): 147-159.

Kennedy HP, (2004) Enhancing Delphi Research: Methods and Results. Journal of Advanced Nursing, 45(5): 504-511.

Khajeh Hoseini L, Jalilzadeh Yengejeh R, Mahmoudie A, Mohammadi Rouzbehani M, Sabz Alipour S, (2021) Prioritization of Effective Strategic Parameters in the Removal of VOCs from the ROP System by Using AHP: A Case Study of Abadan Oil Refinery. Journal of Health Sciences & Surveillance System, 9(3):199-205.

Liu HC, Liu L, Liu N, (2013) Risk evaluation approaches in failure mode and effects analysis: A literature review. Expert systems with applications, 40(2): 828-838.

Lyu B, Lee K, Kim T, Cho H, Moon I, (2018) Damage reduction strategies against chemical accidents by using a mitigation barrier in Korean chemical risk management. Safety Science, 110: 29-36

Masoumi A,  Yengejeh  RJ, (2020). Study of chemical wastes in the Iranian petroleum industry and feasibility of hazardous waste disposal. Journal of Environmental Health Science and Engineering, 18(2):1037-1044.

McKenna H, Hasson F, Smith M, (2002) A Delphi survey of midwives and midwifery students to identify non-midwifery duties. Midwifery, 18(4): 314-322.

Omidvar M, Nirumand F, (2017) Risk assessment using FMEA method and on the basis of MCDM, Fuzzy logic and Grey theory-a case study of overhead cranes. Journal of Health and Safety at Work, 7(1): 63-77.

Ravan Nakhjavni H, Fataei E, (2015) The evaluation of the risk of quality of underground wells of Ardabil plain to heavy metals. Journal of Biodiversity and Environmental Sciences, 7(1): 326-337.

Sadaqat A, Fawad A, Muhammad S, Zahid H, (2018) Failure Modes and Effects Analysis of Chemical Storage, Sarhad University International Journal of Basic and Applied Sciences. 34-38  https://www.researchgate.net/publication/328842169

Sekhavati  E,  Jalilzadeh Yengejeh  R, (2021) Assessment Optimization of Safety and Health Risks Using Fuzzy TOPSIS Technique (Case Study: Construction Sites in the South of Iran). Journal of Environmental Health and Sustainable Development, 6(4): 1494-1506.

Setareh H, Koohpayi A, (2005) Fire risk assessment. First edition, Fanavaran Publishing House, Tehran. (In Persian)

Shi C, Duo YQ, (2010) Safety Capacity for hazardous chemicals transportation of chemical industry park. Transport Standard. 5: 64-67. in Chinese. [Google Scholar]

Soltanzadeh A, Hamidreza H, Mohammadi H, Mohammadbeigi A, Sarsangi V, Darakhshan Jazari M, (2019) Comprehensive Causal Analysis of Occupational Accidents' Severity in the Chemical Industries: A Field Study Based on Feature Selection and Multiple Linear Regression Techniques. Journal of Health and safety at Work, 9(4): 310-307.

Vazdani S, Sabzghabaei G, Dashti S, Cheraghi M, Alizadeh R, Hemmati A, (2018) Application of FMEA Model for Environmental, Safety and Health Risks Assessment of Gas Condensates Storage Tanks of Parsian Gas Refining Company in 2016. Journal of Rafsanjan University of Medical Sciences, 17(4): 345-358.

Windle, PE, (2004) Delphi Technique: Assessing Component Needs. Journal of PeriAnesthesia Nursing, 19(1): 46-7.

Duan, F., Song, F., Chen, S., Khayatnezhad, M. & Ghadimi, N. 2022. Model parameters identification of the PEMFCs using an improved design of Crow Search Algorithm. International Journal of Hydrogen Energy, 47, 33839-33849.

Elsayied Abdein, A. A. 2022. The efficiency of Nitrogen utilization and root nodules' life cycle in Alfalfa after various mineral fertilization and

cultivation of soil. Water and Environmental Sustainability, 2, 13-20.

Guo, H., Gu, W., Khayatnezhad, M. & Ghadimi, N. 2022. Parameter extraction of the SOFC mathematical model based on fractional order version of dragonfly algorithm. International Journal of Hydrogen Energy, 47, 24059-24068.

Lin, H. 2022. Levafix blue color's visible light degradation utilizing Fenton and photo-Fenton procedures. Water and Environmental Sustainability, 2, 1-8.

Mobar, S. & Bhatnagar, P. 2022. ling women by Greenhouse plan as illustrated in the Post-Feminist Tamil Film 36 Vayadhinile. Water and Environmental Sustainability, 2, 9-12.

Zhang, J., Khayatnezhad, M. & Ghadimi, N. 2022. Optimal model evaluation of the proton-exchange membrane fuel cells based on deep learning and modified African Vulture Optimization Algorithm. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44, 287-305.