A Study on the Forming of Sheet Metal Parts Using Multi-Point Forming Technology

Journal of Modern Processes in Manufacturing and Production

مقاله 6، دوره 2، شماره 1، اردیبهشت 2013، صفحه 39-48   

نوع مقاله: Research Paper

نویسندگان

Vahid Rikhtehgar Nezami^{* 1}؛ Behrooz Zareh²؛ Abbas Vafaee Sefat³

¹MSc Student of Mechanical Engineering, Islamic Azad University, Science and Research Branch

²MSc Student of Mechanical Engineering , Babol Noshirvani University of Technology

³Associate Prof. of Emam Hosein University

چکیده

In recent years, in order to reducing die design and manufacturing costs, Multi point forming technique has gained an increasing interest because of its high flexibility. In this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. In this paper, the fundamental principles of multi-point forming was described and the possibility of forming the one sheet metal part by this technique was investigated experimentally and analyzed using finite element simulation. Wrinkles and dimples are the most typical defects in multi-point forming of sheet metal. By the proper selection of process parameters the sound cup with good surface quality and uniform thickness distribution can be formed. The results obtained demonstrated that multi-point forming technology can be used as an effective and economic tool to the forming of single parts with different shapes and is cost-effective.

کلیدواژه‌ها

Multi-Point Forming؛ Finite element simulation؛ Wrinkle؛ Dimple