Reliability Enhancement of Power System via SVC Placement

Majlesi Journal of Electrical Engineering

مقاله 3، دوره 7، شماره 4، اسفند 2013، صفحه 17-26   

نوع مقاله: Review Article

نویسندگان

Babak Sadeghi^{* 1}؛ Mehrdad Rostami²؛ H. Torabipour¹؛ A.R. Gholami¹؛ Y. Shahsavari¹

¹MSc Student, Shahed University, Tehran, Iran

²Department of Electrical Engineering, Shahed University, Tehran, Iran

چکیده

In this paper, reliability of power system has been studied based on different Static Var Compensator (SVC) locations in power system. First, reliability model of SVC has been presented and then reliability indices of power system have been introduced. Furthermore, three different scenarios have been considered for SVC placement and these scenarios have been compared based on different reliability factors and losses of power system. It has been shown that each scenario may give unique solution for optimization problem based on reliability indices and losses. Also, it has been discussed that number of SVCs directly affects reliability and losses of power system, but increases cost of operation. 

کلیدواژه‌ها

en

مراجع

REFERENCES

[1] M. Kang, and J. Mutale, “Risk and reliability worth assessment of power systems under corrective control,” In North American Power Symposium (NAPS), 2009, pp. 1-6. IEEE, 2009.

[2] R. Bilinton, M. Fotuhi-Firuzabad, S. O. Faried,“Power System Reliability Enhancement Using a Thyristor Controlled Series Capacitor,” IEEE Transactions on Power Systems, Vol 14, No 1, pp 369-374, Feb 1999.

[3] R. Bilinton, M. Fotuhi-Firuzabad, S. O. Faried, S. Aboreshaid, “Impact of Unified Power Flow Controllers on Power System Reliability,” IEEE Transactions on Power Systems, Vol 15, No 1, pp. 410-415, February 2000.

[4] Hingorani, Narain G., “FACTS technology and opportunities,” Flexible AC Transmission Systems (FACTS)-The Key to Increased Utilisation of Power Systems, IEE Colloquium on (Digest No. 1994/005), pp. 4-1. IET, 1994.

[5] Taylor, C. W., Guy Scott, and Adel Hammad, “Static var compensator models for power flow and dynamic performance simulation,” IEEE Transactions on Power Systems (Institute of Electrical and Electronics Engineers);(United States) 9, no. 1 (1994), pp 229-240.

[6] Chaloupek, John, Daniel Tauritz, Bruce McMillin, and Mariesa Crow, “Evolutionary Optimization of Flexible A/C Transmission System Device Placement for Increasing Power Grid Reliability,” International Workshop on Frontiers in Evolutionary Algorithms. 2005.

[7] Del Valle, Yamille E, “Optimization of power system performance using facts devices,” (2009). dissertation available at: http://smartech.gatech.edu/handle/1853/29612

[8] Ishak, S., A. F. Abidin, and T. K. A. Rahman. “Static Var compensator planning using artificial immune system for loss minimisation and voltage improvement,” Power and Energy Conference, 2004. PECon 2004. Proceedings. National, pp. 41-45. IEEE, 2004.

[9] Janke, Alwyn, John Mouatt, Ron Sharp, Hubert Bilodeau, Bo Nilsson, Mikael Halonen, and Anders Bostrom. “SVC operation & reliability experiences,” Power and Energy Society General Meeting, 2010 IEEE, pp. 1-8. IEEE, 2010.

[10] Pourbeik, P., R. J. Koessler, and B. Ray. “Tools and techniques for analyzing voltage stability related reliability challenges,” Transmission and Distribution Conference and Exposition, 2003 IEEE PES, vol. 1, pp. 417-421. IEEE, 2003.

[11] Janke, Alwyn, John Mouatt, Ron Sharp, Hubert Bilodeau, Bo Nilsson, Mikael Halonen, and Anders Bostrom. “SVC operation & reliability experiences,” In Power and Energy Society General Meeting, 2010 IEEE, pp. 1-8. IEEE, 2010.

[12] Huang, Gamg M., and Y. Li. “Composite power system reliability evaluation for systems with SVC and TCPAR,” Power Engineering Society General Meeting, 2003, IEEE, vol. 2. IEEE, 2003.

[13] Acha, Enrique, C. R. Fuerte-Esquivel, Hugo Ambriz-Perez, and C. Angeles-Camacho, “FACTS-Modelling and simulation in Power Networks,” Canadian Review (2004), Pages 9-41.

[14] Billinton, Roy, Ronald Norman Allan, and Ronald N. Allan, “Reliability evaluation of power systems,” Vol. 2. New York: Plenum Press, 1984. Pages 18-79.

[15] Li, Wenyuan, “Reliability assessment of electrical power systems using Monte Carlo methods,” Springer, 1994, Pages 209-253.

[16] Čepin, Marko, “Assessment of Power System Reliability: Methods and Applications”, Springer, 2011, Pages 171-190.